Appleton™ PN IVMV3LCG5BU

Industrial,3K,C,G,5,BU

Directly mounts to Crouse-Hinds™ Champ™ mounting hoods mounting hoods without an adapter
Luminaire lid includes an IP68 cord grip ideal for applications where water is present in the conduit to prevent water ingress into the fixture. Suitable for use in marine and wet locations
Ideal for use in areas of low clearance, low ceiling heights or where fixture weights must be minimized
Typical industries include processing plants, chemical plants, foundries, waste treatment, mining and steel mills with harsh industrial applications
Typical applications include walkways/catwalks, stairwells, tunnels, pipe racks, and processing areas
Compact light weight low profile design is suited for low mounting heights (less than 12 lbs)
Customize to the application requirements with four different field replaceable globe options: clear and diffused polycarbonate, clear glass, or prismatic glass refractor
Three Correlated Color Temperatures (CCTs) for a wide variety of applications: Cool (5000K), Neutral (4000K) and Warm (3000K)
Three light output levels for retrofit of HID fixtures up to 175W
Standard 6 kV surge protection
Luminaire comes pre-wired with three conductors, approximately 12" long, of 14 AWG TEW wire from the IP68 watertight NPT hub at the top of the luminaire lid

NEC/CEC Certifications and Compliances: Type 3R, 4, 4X; IP66/67; Simultaneous Exposure; Suitable for Use in Wet Locations; Marine Outside Type (Salt Water) For USA ONLY; American Bureau of Shipping (ABS) Certified

Lumens to Watts: 3300 lumens is 70-100 W HID, 4400 lumens is 100-150 W HID, 5500 lumens 150-175 W HID

Ambient Temperature: BU: -40 °C to +65 °C (-40 °F to +149 °F); BH: -40 °C up to +65 °C (-40 °F up to +149 °F)

Standard Materials: Cast copperfree (4/10 of 1% max.) aluminum luminaire body with stainless steel hardware. Polycarbonate or glass globe with stainless steel wire guard. Heat-resistant prismatic glass refractor with die cast aluminum guard.

Standard Finishes: Luminaire body and glass refractor guard have gray epoxy powder coat finish, electrostatically applied for complete uniform protection